The Idle Conveyor/Restart Conveyor buttons can be displayed on the Touch Entrance Sign and on the Stack Management screen

• The Idle Conveyor setting is used to temporarily stop the conveyor without putting the system into Panic. Selecting the Idle Conveyor button stops the conveyor while maintaining the state of other equipment in the tunnel. This can be helpful in resolving issues that arise in the tunnel without putting the system into a Panic condition. Upon selecting the Idle Conveyor button, a timer is started that when reached the system will automatically go into a Panic state.

NOTE: The exit video stops if the conveyor stops for any reason, including Idle Conveyor.

• If the Restart Conveyor button is pressed before the specified time is reached on the timer, the conveyor will restart without entering the system into a Panic state.

The below images are examples of the Idle Conveyor/Restart Conveyor buttons on the Touch ES.