View or Change Wash Status

To view or change the wash status of an ICS payment terminal to open or close, follow these steps:

  1. Prerequisite: This feature will only work if your software control is configured to open or close the Wash Open inputs. If hardware switches are wired in, then you would use those to control the open or close status of the devices.

  2. Log in to the WashConnect, select your local site, and then select the Log In button.

    NOTE: Multiple sites are only available when logged in to WashConnect Corporate. Wash Status is only available from the site level login.

  3. Select Monitoring System > Wash Status.
  4. In the Site box, select specific sites from the list or All.
  5. Click the Refresh button. 

The status of the ICS payment terminals are displayed as open or closed.



  1. Locate the ICS payment terminal to change the status, and click on the Closed or Open slider depending on the desired status. 

  

       Closed          Open

  1. To open the gate of the specified ICS payment terminal manually, see Send Gate Open.

    WARNING: You cannot manually close the gate from the Wash Status tab. When a sensor or loop detects the vehicle has cleared the gate, only then will the gate close. 
     

    NOTES:

    • If your site has Touch 'N Clean payment terminals, the Touch 'N Clean wash status cannot be not modified from this tab, only viewed.
    • If you want to rename a device, such as Auto Sentry 2, contact Technical Support as only they can change the name for you.




    Was this content helpful?